|
A Comprehensive range of STEEL SPRING AND
RUBBER HANGERS offering the user a choice between low frequency
Vibration isolation or optimum performance at higher audible
frequencies if noise control is of paramount importance.
Wide load ranges and fixing requirements are
catered for including wire suspension of acoustic
ceilings. Special Hangers combining steel springs and
rubber elements are available (also higher deflection springs,
if required)
*
Steel frame tested to 5x rated load.
Other steel parts are zinc plated
including ACH casing.
* Color
coded steel springs with
nominal deflections up to 50 mm,
laterally stable with 50% overload
capacity.
* Rubber
inserts for high frequency
attention on type SH also to prevent
drop-rod contacting hanger frame.
* Failsafe
steel overload washers
supplied with Rubber Hangers.
* Captive
assemble with dropod
connector on type SH
allows
per-compression of spring prior to
installation if required.
* 15
angular misalignment capability.
* Stud
or wire fixing on type ACH.
|
