STYLES : OSB, OS 25 & OS 50
This unique range of open Spring Mountings
uses integral rubber end fixing of the springs which set them apart from all
other designs. Loose springs and plates are now history and high frequency
noise attenuation is provided regardless of whether a rubber seating pad is used
Originally designed for use with type IPF
Inertia Pouring Frames, the OS Mountings are now widely used to isolate
vibration from every conceivable type of rotating and reciprocating
machine. Some examples being Air Handing Units, Axial and Centrifugal
Fans, Low Level, Pipework, Ductwork, condensing Units, Pumps generating Sets,
Chillers, etc. Where Control of transient motion is required Open Spring
Mountings can be used in conjunction with our Viscous Dampers Type KVD.
- Unique expanding rubber and fixing f springs which also
provides high frequency attenuation.
- Nominal 20,25, & 50 mm deflection color springs with 50%
- Can be bolted to supporting structure or free standing on 6mm
thick rubber rubber pad.
- Fully height adjustable.
- Zinc plated metals.
- No snubbing gives maximum efficiency.