and Centrifugal fans
and Multi Cylinder
Note : Turret mountings should
not be used on machines exhibiting high out of balance forces without
|If bolting is preferred
Mountings are furnished with a tapped hole in the center. This
enables the equipment to be bolted securely to the mounting.
Mobile Mounting A restraining bolt is
required for mobile and marine applications to control inertia forces.
Mobile mounting have the same load deflection characteristics as the
No bolting required Mountings may be
used without bolting under machines having no lateral or severe vertical
If bolt hole is inaccessible Use set
screw threaded up from under side. "H" must exceed maximum