|
Air Coolers
|
Model
AC-027
Capacity Rating: 27 watts at a 0 °C temperature difference
Example Applications: Ideal for small electronic
enclosures, small refrigerators and OEM applications.
Features: This is our smallest air cooler. It is powered by
12 VDC, has a NEMA 12 rating, and can be customized to achieve
NEMA 4. Like all of our air coolers, it incorporates extender
blocks between the thermoelectric module and the cold sink. These
enable the cooler to have un-impeded airflow on the cold side
while still allowing for up to 25 mm thick insulation in the walls
of the enclosure. Plus, it also improves performance at high
temperature differences. This cooler has the lowest power
consumption of any of our standard air coolers making it
compatible with all of our temperature controllers.
|
 |
|
Model
AC-046
Capacity Rating: 46 watts at a 0 °C temperature difference
Example Applications: Ideal for small to medium-sized
electronic enclosures, refrigerators, and reagent coolers in
biomedical equipment.
Features: This cooler is powered by 24 VDC, has a NEMA 12
rating, and can be customized to achieve NEMA 4. It uses two
thermoelectric modules and our proprietary high-density extruded
heat sinks to yield a good combination of performance and low
cost. The low power consumption makes this cooler compatible with
the TC-24-10, TC-24-12, and the TC-24-25 series temperature
controllers. Like all of our coolers, it can be easily customized
to meet your production requirements: special wiring
configurations, smaller heat sinks, different operating voltages,
lower power consumption, etcetera.
|
|
Model
AC-073
Capacity Rating: 73 watts at a 0 °C temperature difference
Example Applications: Biomedical equipment and medium sized
electronics enclosures.
Features: This cooler is powered by 24 VDC, has a NEMA 12
rating, and can be customized to achieve NEMA 4. It uses two large
thermoelectric modules and a high-density bonded-fin heat sink
that provide excellent performance in a compact footprint. It is
compatible with the TC-24-12 and TC-24-25 series temperature
controllers.
|
|
Model
AC-162
Capacity Rating: 162 watts at a 0 °C temperature
difference
Example Applications: Electronic enclosures, refrigerators
and biomedical equipment where cooling to near-freezing
temperatures is desired.
Features: Six thermoelectric modules, extender blocks, and
a bonded-fin heat sink and cold sink make this cooler very
efficient and compact for its capacity. The bonded-fin cold sink
keeps the temperature difference between the enclosure's air and
the cold sink to a minimum. This is especially useful for cooling
to temperatures near 0 °C when a less efficient cold sink would
allow condensation to freeze on it and restrict airflow. This
cooler is powered by 24 VDC, is rated to NEMA 12, and can be
customized to achieve NEMA 4. It is compatible with the TC-24-25
series temperature controllers.
|
|
Model
AC-194
Capacity Rating: 194 watts at a 0 °C temperature
difference
Example Applications: Ideal for telecommunications
equipment, electronics enclosures, battery boxes and
refrigerators.
Features: This cooler is powered by 48 VDC and is rated to
maintain the enclosure's NEMA 4 rating. The hot-side fan is sealed
against moisture, and the heat sink uses marine-grade anodizing to
prevent corrosion. The input wires are routed on the cold side of
the cooler, making it easy to power via wiring from inside the
enclosure although care should be taken so that condensation is
not allowed to form on the cold sink.
Back
| Home | Enquiry
|
|
|
