Model CP-031
Capacity Rating: 31 watts at a 0 °C temperature difference
Example Applications: Small laser diodes and laboratory
instruments.
Features: This cold plate provides effective direct contact
cooling in our lowest cost standard assembly. The lack of an
extender block between the module and cold plate helps make this our
smallest cold plate. The cooler is best suited for small heat loads
where a large temperature difference is not needed. Powered by
12VDC, it has the lowest power consumption of any of our standard
cold plates, which makes it compatible with all of our temperature
controllers.
Model CP-036
Capacity Rating: 36 watts at a 0 °C temperature difference
Example Applications: Medical and laboratory instruments.
Features: Provides good cooling for small heat loads at low
temperatures. This is made possible by using a large heat sink for
only one thermoelectric module and an extender block that allows
extra insulation between the heat sink and cold plate. Powered by
12VDC, its low power consumption makes it compatible with all of our
temperature controllers.
Model CP-065
Capacity Rating: 65 watts at a 0 °C temperature difference
Example Applications: Medical and laboratory instruments,
thermal stabilization of electronic components, and laser diodes.
Features: Two-module cold plate increases the heat-pumping
capacity for cooling medium sized heat loads. Like all of our
coolers, it can be easily customized to meet your production
requirements: special cold plates, smaller heat sinks, different
operating voltages, lower power consumption, et cetera. This cooler
is powered by 24 VDC and is compatible with the TC-24-10, TC-24-12,
and the TC-24-25 series temperature controllers.
Model CP-127
Capacity Rating: 127 watts at a 0 °C temperature difference
Example Applications: Laboratory instruments, laser diodes,
medical products,
and cooling corrosive liquids with an optional stainless-steel
liquid exchanger.
Features: This cold plate uses two large thermoelectric
modules for cooling medium sized heat loads. The high efficiency
bonded-fin heat sink keeps the cooler small yet effective. One
stainless-steel liquid exchanger can also be attached for cooling of
corrosive liquids (please inquire for this option). This cooler is
powered by 24 VDC and is compatible with the TC-24-12 and TC-24-25
series temperature controllers.
Model CP-218
Capacity Rating: 218 watts at a 0 °C temperature difference
Example Applications: Laboratory instruments, component test
benches, high-power laser diodes, and cooling corrosive liquids with
optional stainless-steel
liquid exchangers.
Features: Our largest standard cold plate uses six
thermoelectric modules, a bonded fin heat sink, and extender blocks
for large heat loads or good cooling to low temperatures. A tabletop
version is available (it has legs to space the fan over a table top)
as well as a high-temperature version (the heating temperature is
extended from 70 °C to 130 °C). Additionally, two stainless steel
liquid exchangers can also be attached for cooling of corrosive
liquids. Please inquire if you are interested in these options. All
versions of this cooler are powered by 24 VDC and are compatible
with the TC-24-25 series temperature controllers.
