Liquid Coolers
Model
LC-035
Capacity Rating: 35 watts at a 0 °C temperature
difference
Example Applications: In-process fluid cooling and
gas drying in analytical instruments.
Features: This cooler is best suited for small heat
loads. Like all of our coolers, it can be easily customized
to meet your production requirements: special liquid plates,
smaller heat sinks, different operating voltages, lower
power consumption, etcetera. Powered by 12VDC, it has the
lowest power consumption of any of our standard liquid
coolers, which makes it compatible with all of our
temperature controllers.
|
 |
Model
LC-061
Capacity Rating: 61 watts at a 0 °C temperature
difference
Example Applications: Recirculating water chillers,
cooling in-process fluid, and gas drying in analytical
instruments.
Features: A four-pass liquid loop provides a very
good thermal link between the fluid and the two
thermoelectric modules. The aluminum portions of the liquid
path are hard-coat anodized to prevent corrosion. For
stainless steel liquid paths select a cold-plate style
cooler and add an optional stainless steel liquid plate.
This cooler is powered by 24 VDC and is compatible with the
TC-24-10, TC-24-12, and the TC-24-25 series temperature
controllers.
|
 |
Model
LC-120
Capacity Rating: 120 watts at a 0 °C temperature
difference
Example Applications: Cooling or heating of therapy
pads.
Features: An eight-pass liquid loop provides an
excellent thermal link between the fluid and the four
thermoelectric modules. The large fan can operate on a
reduced voltage yielding lower noise with only a small
reduction in performance. This cooler is powered by 24 VDC
and is compatible with the TC-24-25 series temperature
controllers.
|
 |
Model
LC-200
Capacity Rating: 200 watts at a 0 °C temperature
difference
Example Applications: Laboratory instruments, laser
diode cooling, medical products, recirculating chillers,
temperature baths.
Features: High-density bonded-fin heat sink, an
eight-pass liquid loop, and six thermoelectric modules for
high capacity in a compact size. As with all of our liquid
coolers it can be customized with swirl inserts in the
liquid loop to improve efficiency at low flow rates. This
cooler is powered by 24 VDC and is compatible with the
TC-24-25 series temperature controllers.
|
|
|
