* Total Solution for All Your Industrial Needs *

COLD PLATES

Capacity Rating: 31 watts at a 0 °C temperature difference
Example Applications: Small laser diodes and laboratory instruments.\

• This cold plate provides effective direct contact cooling in our lowest cost standard assembly.
• The lack of an extender block between the module and cold plate helps make this our smallest cold plate.

• The cooler is best suited for small heat loads where a large temperature difference is not needed.
• Powered by 12VDC, it has the lowest power consumption of any of our standard cold plates, which makes it compatible with all of our temperature controllers.

Capacity Rating: 36 watts at a 0 °C temperature difference
Example Applications: Medical and laboratory instruments.

• Provides good cooling for small heat loads at low temperatures. This is made possible by using a large heat sink for only one thermoelectric module and an extender block that allows extra insulation between the heat sink and cold plate.
• Powered by 12VDC, its low power consumption makes it compatible with all of our temperature controllers.

Capacity Rating: 65 watts at a 0 °C temperature difference
Example Applications: Medical and laboratory instruments, thermal stabilization of electronic components, and laser diodes.

• Two-module cold plate increases the heat-pumping capacity for cooling medium sized heat loads.
• Like all of our coolers, it can be easily customized to meet your production requirements: special cold plates, smaller heat sinks, different operating voltages, lower power consumption, et cetera.
• This cooler is powered by 24 VDC and is compatible with the TC-24-10, TC-24-12, and the TC-24-25 series temperature controllers.
  

Capacity Rating: 127 watts at a 0 °C temperature difference
Example Applications: Laboratory instruments, laser diodes, medical products, and cooling corrosive liquids with an optional stainless-steel liquid exchanger.

• This cold plate uses two large thermoelectric modules for cooling medium sized heat loads.
• The high efficiency bonded-fin heat sink keeps the cooler small yet effective. One stainless-steel liquid exchanger can also be attached for cooling of corrosive liquids (please inquire for this option).
• This cooler is powered by 24 VDC and is compatible with the TC-24-12 and TC-24-25 series temperature controllers.

Capacity Rating: 218 watts at a 0 °C temperature difference
Example Applications: Laboratory instruments, component test benches, high-power laser diodes, and cooling corrosive liquids with optional stainless-steel liquid exchangers.

• Our largest standard cold plate uses six thermoelectric modules, a bonded fin heat sink, and extender blocks for large heat loads or good cooling to low temperatures.

• A tabletop version is available (it has legs to space the fan over a table top) as well as a high-temperature version (the heating temperature is extended from 70 °C to 130 °C).

•  Additionally, two stainless steel liquid exchangers can also be attached for cooling of corrosive liquids. Please inquire if you are interested in these options.

• All versions of this cooler are powered by 24 VDC and are compatible with the TC-24-25 series temperature controllers.

HOME  |  ENQUIRY