|
LIQUID COOLERS |
|
| Model
LC-035
Capacity Rating: 35 watts at a 0 °C temperature difference
Example Applications: In-process fluid cooling and gas drying in
analytical instruments. |
Features:
- This cooler is best suited for small heat loads. Like all of our
coolers.
- it can be easily customized to meet your production
requirements: special liquid plates, smaller heat sinks, different
operating voltages, lower power consumption, etcetera.
- Powered by 12VDC, it has the lowest power consumption of any of our
standard liquid coolers, which makes it compatible with all of our
temperature controllers.

|
 |
 |
| Model
LC-061
Capacity Rating: 61 watts at a 0 °C temperature difference
Example Applications: Recirculating water chillers, cooling
in-process fluid, and gas drying in analytical instruments |
Features:
- A four-pass liquid loop provides a very good thermal link between
the fluid and the two thermoelectric modules.
- The aluminum portions of the liquid path are hard-coat anodized to
prevent corrosion. For stainless steel liquid paths select a
cold-plate style cooler and add an optional stainless steel liquid
plate
- This cooler is powered by 24 VDC and is compatible with the
TC-24-10, TC-24-12, and the TC-24-25 series temperature controllers.
|

|
|
| Model
LC-120
Capacity Rating: 120 watts at a 0 °C temperature difference
Example Applications: Cooling or heating of therapy pads
|
Features:
- An eight-pass liquid loop provides an excellent thermal link between
the fluid and the four thermoelectric modules.
- The large fan can operate on a reduced voltage yielding lower noise
with only a small reduction in performance.
- This cooler is powered by 24 VDC and is compatible with the TC-24-25
series temperature controllers.
|
|
|
| Model
LC-200
Capacity Rating: 200 watts at a 0 °C temperature difference
Example Applications: Laboratory instruments, laser diode cooling,
medical products, recirculating chillers, temperature baths.
|
Features:
- High-density bonded-fin heat sink, an eight-pass liquid loop, and
six thermoelectric modules for high capacity in a compact size.
- As with all of our liquid coolers it can be customized with swirl
inserts in the liquid loop to improve efficiency at low flow rates.
- This cooler is powered by 24 VDC and is compatible with the TC-24-25
series temperature controllers.
|
|
|
|
HOME | ENQUIRY
|